AT471 Plastic Pipe Thermostability Chamber is used for hydrostatic test when tubes are at 110 degrees, with the inner tube medium being air. It measures whether the sample is damaged under stress conditions for 8760 hours. It can be matched with a Hydrostatic Pressure Tester to complete the thermal stability test in a hydrostatic state. This instrument complies with the following international and industry standards: ISO: ISO 1167, ISO DIN 15874; GB/T: GB/T 6111. Double insulated glass door with a built-in observation lamp, facilitating observation of the test situation and avoiding accidental burns. A reasonable drainage device can drain the water produced by test failure stations, reducing the impact on other stations. Thicker insulation design reduces experiment costs and improves instrument reliability. All stainless steel frame and liner, aesthetically pleasing and with enhanced corrosion resistance. The heater has a self-protection function to avoid accidental damage. Unique fixture exhaust design greatly reduces the user's labor intensity. Technical Specification Model: AT471 Plastic Pipe Thermostability Chamber; Max. pipe diameter: Φ63mm; Temperature range: R.T ~ 120℃; Temperature accuracy: ±1℃; Temperature evenness: 1℃; Max length of pipe: 500mm; Working position: 12; Power supply: 220V, 50Hz