AT226 Laboratory Melt Spinning Machine is a main key equipment in synthetic fibre production. This machine uses high temperature ceramic to heat and melt the polymer sample, and extrude the sample to be liquid trickle from a spinneret under the effect of inert gas pressure, then nascent fibers form under the effect of air cooling. It consists of heating system, spinneret system, winding system. It adopts perspective organic glass door, easy to observe. Touch screen display, easy to operate. Thicken stainless steel feed cylinder to make sample heating more uniform. Test temperature real-time monitoring, the max. Temperature can be 450℃. With stirring function to ensure uniform heating. With stainless steel winding roller, and there is a paper bobbin outside of the roller, easy to mount and dismount. Extruding power source: inert gas cylinder, with whole air pressure regulation facility. With winding displacement system to make winding roller move left and right to ensure uniform and smooth winding. Technical Specification Model: AT226Laboratory Melt Spiniing Machine Pressure: range Design pressure: 3.6MPa Input: pressure: ≤13MPa, Output: pressure: ≤1.6MPa, accuracy: ±0.01MPa Temperature range: 450℃ max. Temperature accuracy: ±0.5℃ Heating mode: Two sections of heating furnace, Mullite fiber insulation Temperature control mode Two pieces of temperature controller, high precision of ±0.5℃Feed cylinder500ml, stailess steel, with soaking distribution deviceSpinneret plate Dia. 0.2, 0.3, 0.4, 0.5 optionalL:D: 2:1~3:1 optionalSix holes or single hole optional (please specify before order)Winding systemRotary head Friction driven rotary headSpeed range300~2800m/minWinding roller dia. 120mm (outer diameter)Max. Winding dia.320mmRotary head Friction driven rotary head Power supply: AC220V, 50Hz Dimensions: 700mm×500mm×1700mmWeights 130kg