AT130 Laboratory Melt Spinning Machine is a main key equipment in synthetic fibre production. This machine uses high temperature ceramic to heat and melt the polymer sample, and extrude the sample to be liquid trickle from a spinneret under the effect of inert gas pressure, then nascent fibers form under the effect of air cooling. It consists of heating system, spinneret system, winding system. It adopts perspective organic glass door, easy to observe. Thicken 316 stainless steel feed cylinder to make sample heating more uniform. Test temperature real-time monitoring, the max. Temprature can be 400℃. Uses replaceable paper cylinder (width: 120mm). Technical Specification Model: AT130Laboratory Melt Spinning Machine Pressure: range Design pressure: 3.6MPa Input: pressure: ≤13MPa, Output: pressure: ≤1.6MPa, accuracy: ±0.01MPa Temperature range: 450℃ max. Temperature accuracy: ±0.5℃ Heating mode: Two sections of heating furnace, Mullite fiber insulation Temperature control mode Two pieces of temperature controller, high precision of ±0.5℃Feed cylinder500ml, stailess steel, with soaking distribution deviceSpinneret plate Dia. 0.2, 0.3, 0.4, 0.5 optionalL:D: 2:1~3:1 optionalSix holes or single hole optional (please specify before order)Winding systemRotary head Friction driven rotary headSpeed range300~2800m/minWinding roller dia. 120mm (outer diameter)Max. Winding dia.320mmRotary head Friction driven rotary head Power supply: AC220V, 50Hz Dimensions: 700mm×500mm×1700mmWeights 130kg